Category:   Skill Level:
Modern Circle Pillow
Modern Circle Pillow

Created by: Alissa Haight Carlton

Be sure to give us feedback on this project below.


Level: Intermediate
Time: 5 hours

Using two contrasting solid fabrics to make this pillow leads to the graphic pattern the piecing creates. Patterned fabric as could work here, but I’d recommend keep it very small scale and the negative space (fabric B) solid so that the design reads well.

Janome Supplies Required
Any Janome Sewing Machine
¼” Seam Foot O
Blue Tip Needles
 

Fabric & batting requirements:
Pillow Front:
Fabric A: ½ yard
Fabric B: ¼ yard

Batting: 21” x 21” square

Backing scrap fabric: 21” x 21” square (this won’t show so use some scrap fabric that you don’t care about)
Pillow Back:
Two 19” x 13” rectangles. I used Fabric B.
You also need one 18” pillow form for each pillow you make.
 

Instructions:
Cutting:

Label your pieces as you cut them out so that it’s easy to keep track of them.


Fabric A:
1. Cut out
A1 = 36” x 1.25”
A2 = 42” x 1.5”
A3, A4, A5 = 7” x 1.25”
A6, A7 = 14.5” x 1.5”
A8 = 31” x 1.5”

Fabric B:
2. Cut out
B1 = 36” x 1.5”
B2 = 42” x 1.25”
B3, B4 = 7” x 1.5”
B5, B6, B7 = 14.5” x 1.25”
B8 = 38” x 3.5”
B9 = 30” x 1.5”

3. Cut A8 into two 6.5” x 1.5” and eight 2.25” x 1.5” pieces. Label as indicated above.
4. Cut B8 into two 19” x 3.5” pieces, label as indicated above.
5. Cut P9 into four 7.5” x 1.5” pieces and label as indicated above.

Making the pillow top:
It is key to keep a uniform scant ¼” seam allowance for this pillow to turn out the correct size.


1. Piece together A1 and B1
2. Piece together B2 and A2
3. Piece together A3, B3, A4, B4, A5
4. Piece together B5, A6, B6, A7, B7

5. Cut A1/B1 portion into four 3.5” wide and four 5.5” wide pieces. Label as indicated above.
6. Cut B2/A2 portion into two 8.5” wide and two 12.5” wide pieces. Label as indicated above.
7. Cut A3/B3/A4/B4/B5 into two 3.5” wide pieces. Labe as indicated above.

8. Assemble portions 1 through 7 as shown above.

9. Working top to bottom, sew B8.1, portions 1 through 7 and B8.2 together. Your pillow top is all done!

Assembling the pillow sleeve:
11. Layer the pillow top, batting and backing fabric, pin baste and quilt as desired.
12. Working with the backing pieces of fabric, fold and press a ½” of the 19” edge down, and then fold another ½” and press again. Sew in place to close off the edge. Repeat with the second backing piece.
13. Layer your three pillow pieces, right sides together, layering the two back pieces so that they overlap.
14. Using a ½ inch seam allowance, sew all the way around the perimeter of the pillow.
15. Trim the corners, and turn right side out. Fill with your pillow form and you’re all done!
 

User Reviews Submit a Review

Ii nonetheless the more significant the consequences for failure to conform to click to continue http://www.saveyourknees.org/cialis/ how to buy cialis resource was still further accentuated by the massacre of portuguese by the tapuya indians at cunhau.