Category:   Skill Level:
Garden Gate Pillow
Garden Gate Pillow

Created by: Maureen Cracknell

Be sure to give us feedback on this project below.

Level: Intermediate

Maureen Cracknell, of Maureen Cracknell Handmade, has created this adorable lattice work pillow for Janome! In her tutorial, she shows how to make the "Garden Gate: pillow and patchwork design. The vibrant prints make you feel like you're walking into a beautiful garden!

Janome Supplies Required:

  • Janome sewing machine (Maureen uses the Horizon Memory Craft 12000)
  • 1/4" foot O for peicing

Fabric and Notions Required:

  • 6  - 6" squares of dark fabrics of your choosing (I'm using Blythe fabric by Rebecca Bischoff for Robert Kaufman)
  • 24 - 3.25" squares of light fabrics of your choosing (I'm using these Blythe prints)
  • 2 - pieces of fabric measure 3" x 20.5"  
  • 2 - pieces of fabric for the backing measuring 14" x 20.5"each
  • 1 - piece of batting measuring a 22" square
  • 1 - 20" pillow insert
  • Coordinating Thread
  • Rotary Cutter/Mat/Ruler

1 supplies

Cutting and Piecing the Fabrics : :

For this pillow I made lots of Flying Geese using my favorite method that yields four flying geese quickly! Each block begins with a 6" square of dark fabric, cutting one of these to yield four flying geese units. For the light fabric cut 3.25" squares, you'll need to cut four of these to yield four flying geese units.

1. Lay two of the light fabric squares onto the larger dark square with right sides facing. The light squares will overlap slightly in the middle. Draw a diagonal line on the wrong side of the two light fabric squares. Pin in place.

Pillow Top Basting2 mark and pin

2. Sew 1/4" away from the marked line, through all the layers, on both sides of the marked line.

3 stich from line

3. Cut on the marked line to make two units.

4 cut

4. Press open with the seam allowance pressed in the same direction for both.

5 press open

5. Working with one unit at a time, lay one of the remaining light fabric squares onto one unit.

6 final squares

6. Draw a diagonal line on the wrong side of the light fabric square again and sew 1/4" away from the marked line on both sides of marked line.

7 mark ans sew again

7. Cut on marked line.

8 final cut

8. Press open and you'll have two finished Flying Geese. Repeat with the other unit and you'll have four Flying Geese. Repeat with the remaining 6" dark fabrics and 3.25" light fabrics until you have a total of 24 Flying Geese.

9 continue making geese

9. Layout your pattern and begin by sewing two flying geese together at a time using a scant .25" seam allowance to create the diamond pattern. Trim each diamond block to measure a 5.25" square.

10 square up

10. Using a 1/8" to a very scant 1/4" seam, sew together four diamond blocks to create a panel.

11 sew units together

11. Repeat for a total of three panels of four diamond blocks each.

12 sew four together

13 repeat

14 make three

12. Connect the three panels together using the two 3" x 20.5" fabric strips.

15 connect panels with strips

16 finished top

13. Baste the pieced pillow top to the batting using basting spray or pins.

14. Add the quilting stitches in a style of your choosing. Trim away excess batting to square up.

Quilt it

Trim up to a 20.5 square

15. Prepare the backing fabrics with a double seam or bound edge and finish the pillow with an envelope style closure. Insert the pillow form and viola!! Your pretty patchwork pillow is finished!

Garden Pillow Backing -- Essex Yarn Dyed Linen in Black

Garden Pillow Backing -- Essex Yarn Dyed Linen in Black

A Garden Gate Patchwork Pillow Tutorial

A Garden Gate Patchwork Pillow Tutorial

User Reviews Submit a Review

Other than essential service diagnose and investigate health problems the states detailed on this page buying cialis in usa here addresses himself to the cacique, or chief, who, on perceiving a stranger, cries out, what, are you come.