The MyLock 644D includes essential features for simple serging. The differential feed system of two feed dogs virtually eliminates puckered edges on woven fabrics and stretched edges on knits. Its unique rolled hem conversion feature eliminates the need to change the needle plate, foot, or tension setting for rolled hemming. Janome has restructured the lower looper guides for easy access. Color-coded guides are easy to follow for 2, 3, or 4 thread serging. All of the features on this machine are specially designed to make this serger the easiest to use on the market today.
Janome America Inc warrants this Janome sewing machine head for a period of 5 years from the date of original purchase against defects in material or workmanship with the exception of the electrical and/or electronic equipment which is warranted for a period of 2 years from the date of purchase. During the first year from the date of original purchase, defective parts will be exchanged and labor will be provided free of charge. After the first year and during periods of limited warranty, defective parts will be exhanged free of charge, but at the owner's expense for labor. Postage and transportaion are also at the owner's expense. For service under this warranty, present your Janome product, warranty card, and proof of purchase to the Janome dealer from whom the purchase was made or contact Janome America, In., 10 Industrial Ave, Mahwah, NJ 07430-2205.
This sewing machine is warranted only in normal household (non-commerical) use. Needles, belts, bobbins, needle plates, knives, loopers, and light bulbs are not included in this warranty. This warranty does not cover failures caused by improper maintenance or repair, abuse, normal wear and tear, misuse, or events beyond our control.
This warranty extends only to the consumer who has originally purchased this sewing machine from an authorized Janome dealer or to a figt recipient as evidenced by proper return of warranty card. The names and addresses of authorized Janome/New Home Dealers are available upon request.
Except as stated above, there are no other warranties, expressed or implied. Janome America, Inc. shall not be liable for any incidental or consequential damages directly or indirectly arising from use or inability to use this product or from any other cause. Some states do no allow the exclusion or limitation of incidental or consequential damages, so the exclusion or limitation may not apply in all cases.
4 Thread Overlock 3 Thread Overlock 2 Thread Serging Seam Length: 1.00 to 5.00 mm Seam Width: 2.00 to 5.70 mm Adjustable Cutting Width Differential feed: .05 to 2.25 mm Lay-in Tension Unit Tension Discs Separate when Presser Foot Lifted Blade Cutting Length: 12 mm Heavy Duty Cutting System Self Threading Lower Looper Lower Looper Pre-Tension Setting Slider Built-in Accessory Box Waste Chip Box Built-in Rolled Edge Electronic Speed Control Videotape Included Heavy Duty Feed System Maximum Speed: 13 rpm