Janome - Learning Center
 
 
 
 
 
 
Topic Title: JANOME DIGITIZER MB VER 2.0 for multi needle
Topic Summary:
Created On: 08/27/2010 02:27 AM
Linear : Threading : Single : Branch
Topic Tools Topic Tools
View topic in raw text format. Print this topic.
 08/27/2010 02:27 AM
User is offline View Users Profile Print this message

Author Icon
flowerz

Posts: 11
Joined: 03/02/2010

Hello.
I hope I have posted this in the right place on the forum,
My question is, please can anyone tell me will JANOME DIGITIZER MB VER 2.0 for multi needle software work with the janome mc10001 machine?
Or is it just for the multi needle machine!


Pam

-------------------------

Janome mc 10001 - Janome mc 11000 se
Janome 6600P-Huskylock 910
Digitizer pro MB and Janome 12000
 08/27/2010 03:08 AM
User is offline View Users Profile Print this message

Author Icon
Bobc2311

Posts: 69
Joined: 05/20/2007

Hi Pam. Your Digitizer MB can output designs in JEF format which is the format used by your machine. I don't think you can connect your computer directly to your machine like you can with the MC11000 but others who own the mc10001 may correct me here. Use a memory card or memory stick to transfer your designs from computer to mc10001 and you should be OK.
BobC in Oz
 08/28/2010 05:26 AM
User is offline View Users Profile Print this message

Author Icon
flowerz

Posts: 11
Joined: 03/02/2010

Hi Bob,
Thank you for your reply,
That's great news it will support he jef format, what threw me was that it said multi needle on the box & I thought it was some special version just for that machine,

Pam

-------------------------

Janome mc 10001 - Janome mc 11000 se
Janome 6600P-Huskylock 910
Digitizer pro MB and Janome 12000
Statistics
91720 users are registered to the Janome forum.
There are currently 2 users logged in.